Fracture Mechanics of Ceramics: Active Materials, Nanoscale Materials, Composites, Glass, and…

Hardcover | July 29, 2005

EditorR.C. Bradt, D. Munz, M. Sakai

not yet rated|write a review
The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The symposium also addressed new issues on fundamentals of fracture mechanics and contact mechanics, and a session on reliability and standardization.

Pricing and Purchase Info


In stock online
Ships free on orders over $25

From the Publisher

The 8th International Symposium on fracture mechanics of ceramics was held in on the campus of the University of Houston, Houston, TX, USA, on February 25-28, 2003. With the natural maturing of the fields of structural ceramics, this symposium focused on nano-scale materials, composites, thin films and coatings as well as glass. The sy...

Format:HardcoverDimensions:648 pages, 10 × 7.01 × 0 inPublished:July 29, 2005Publisher:Springer USLanguage:English

The following ISBNs are associated with this title:

ISBN - 10:0387241345

ISBN - 13:9780387241340

Look for similar items by category:


Extra Content

Table of Contents

1. Contact Mechanics - Atomic Force Microscopy at Ultrasonic Frequencies (Walter Arnold, A. Caron, S. Hirsekom, M. Kaoycinska-Muller, U. Rabe, and M. Reinstädtler)- Indentation Size Effect on the Hardness of Zirconia Polycrystals (T. Akatsu, S. Numata, Y. Shinoda, F. Wakai- Indentation Fracture, Acoustic Emission and Modeling of the MechanicalProperties of Thin Ceramic Coatings (Steve J. Bull)- Assessing the scratch resistance, fracture resistance and fatigue wear of ion-Beam modified Si and Si02 survaces by nanoscratch and nanoimpact testing (Jinjun Lu, T. Xu, Q. Xue, B.D. Beake)- Microstructural Control of Indentation Crack Extension under ExternallyApplied Stress (Robert F. Cook)- Instrumented Hardness Test on Alumina Ceramics and Single Crystal withSpherical Indenter (Shuji Sakaguchi, K. Hirao, Y. Yamauchi, S. Kanzaki)2. Glass - Controlling the Fragmentation Behavior of Stressed Glass (R. Tandon, S.J. Glass)- Stair-like Impact Fracture of Multiple Glass Sheets (D.L. Ahern, S.E. Jones, R.C.Bradt)- Elasto-Plastic Behavior of Glassy Carbon and Silica Glass by NanoindentationWith Spherical-Tipped Indenter (N. Iwashita, M. Swain, J.S. Field)- Scratch Test for Evaluation of Surface Damage in Glass (S. Yoshida, T. Hayashi, T. Fakuhara, K. Soeda, J. Matsuoka, N. Soga)- Shear-Driven Damage and Internal Friction in Indentation Loading of aGlass-Ceramic (Anthony Fischer-Crip;s)- Indentation and Scratching of Glass Load, Composition,Eenvironment andTemperature Incidences (Tanguy Rouxel, Jean-Christophe SANGLEBOEUF)- Effects of Tin on the Physical Properties and Crack Evolution in Soda-Lime-SilicaFloat Glass (John R. Hellman)- Indentation Size Effects for Glasses: yes, There is a Fracture (George D. Quinn)3. Fracture of Nano-Scale Materials - Slow Crack Propagation in Ceramics at Micro- and Nano-scale: Effect of theMicrostructure (J. Chevalier, G. Fantozzi)- Touthening and Strengthening Mechanisms in Nanocomposits (Hideo Awaji, S-M Choi)4. Composites - Creep Behavior and Mechanisms for CMC with Continuous Ceramic Fibers (Jean-Louis Chermant)- Strain Accumulation and Damage Evolution during Creep of SiCf/SiCComposites (B. Wilshire, H. Burt)- Modeling Multilayer Damage in Cross-ply Ceramics Matrix Composites (M. Kashtalyan, H.W. Chandler)- Quantification of Toughness Increase Due to Metal Particles in GlassMatrix Composites (M. Kotoul, A.R. Boccaccini, I. Dlouhy)- Fracture Resistance of Hybrid Glass Matrix Composites and its DegradationDue to Thermal Aging and Thermal Shock (Z. Chlup, I. Dlouhy, A.R. Boccaccini)- Creep Investigation on SiCf-SiBC Composites (Gaëlle Farizy, Jean Vicens, Jean-Louis Chermant,Jean-Christoph Sangleboeuf)- Fracture Toughness of BaTiO3 - MgO Composites Sintered by SparkPlasma Sintering (Y. Miyashita, S. Rattanachan)- Fracture Toughness of BaTiO3 and BaTiO3-AI203 Composite UnderApplied Electric Field (S. Rattanachan, Yukio Miyashita)- Crack Bridging Behavior in a Strong Interface Oxide/Oxide Composite (N. Du Souich, K. White)- An FE Model of Carbon/Carbon Composite Fracture (J. Ohgi, J.H.. Jackson, A.S. Kobayashi, K.W. White)5. Fracture Fundamentals - Tailoring the Composition of Self-Reinforced Silicon Nitride Ceramics to EnhanceMechanical Behavior (Dr. Paul Becher, G.S. Painter, H.T. line and M.K. Ferber)- Nonlinear Fracture of a Polycrystalline Graphite: Size-Effect Law andIrwin's Similarity (Motosugu Sakai, R. Nonoyama)- Fragmentation of Ceramic Bars in Rapid Expansion Mode (S. Maiti, P. Geubelle)- Experimental Approach to Microfracture Process of Ceramics UnderThermal Shock (S. Wakayama, K. Nishino, K. Kubota, T. Wada, S. Kobayashi)- Finite Element Analysis of Crack-path Selection in a Brick and MortarStructure (Reza Sarrafi-Nour, Mohan Monaharan, and Curtis A. Johnson)- Crack Propagation Processes in Biomedical Grade Hydroxyapatite (C. Benaqqa, J. Chevalier, M. Saadaoui, G. Fantozzi)- Analysis of Fatigue Crack Propagation in Alumina with Different Grain Sizes (H. El Attaoui, M. Saadaoui, J. Chevalier, G. Fantozzi)- Effects of Grain/Pore Size on the Fracture of Electroceramics (C. Lu, F. Fischer, R. Danzer)6. Fracture of Coatings - Particle Impact Damage and Point Load-Induced Fracture Behavior inZirconia Plasma Spray Coating Film (Y. Akimune, K. Matsuo, T. Sugiyama, H. Yoshida, S. Sodoeka, S. Shimizu)- Mode I, Mode II, and Combined Mode Fracture of Plasma-Sprayed Thermal Barrier Coating at Ambient and Elevated Temperatures (Sung R. Choi, D. Zhu, R. Miller)7. Ferroelectric Materials - Modeling of Fracture in Ferroelastic Ceramics (Chad Landis)- Strength and Reliability of Lead Zirconate Titanate (C.S. Watson, s. Burchett, G. Burns, S.J. Glass, M. Hutchinson, R. Moore, P. Yang)8. Reliability Prediction, Standardization and Design - Standard Reference Material 2100: Ceramics Fracture Toughness (G.D. Quinn, K. Xu, R. Gettings, J.A. Salem, J.J. Swab)- Measuring the Real Fracture toughness of Ceramics - The Synergism of ASTMC1421 and NIST SRM 2100 (J.A. Salem, G.D. Quinn, M.G. Jenkins)- Predicting the Reliability of Brittle Material Structures Subjected toTransient Proof Test and Service Loading (Noel N. Nemeth, Osama M. Jadaan, Tamas Palfi, and Eric H. Baker)- Estimation and Stimulation of Slow Crack Growth Parameter from ConstantStress Rate Data (J.A. Salem, A.S. Weaver)- On Integrity of Flexible Display (P.C.P. Bouten)- Fracture of Conductive Cracks in Poled and Depoled PZT-4 Ceramics (Tong-Yi Zhang)- Increasing Resistance to Low Temperature Ageing Degradation of Y-TZP bySurface Modification (Adrian Feder, Paulina Morcillo, Marc Anglada)